5. Install the top (vertical lift) cover on the library using two 10-24 x
Figure 2-9
Installing the Cover and Forehead
Chapter 2
0.50 screws on one side of the library and the connecting tabs on the
other side (Figure 2-9). You can wait to install the back left screw
until you complete step 6.
a. Install the forehead included in the upgrade kit with four 10-24 x
0.50 screws.
b. Install the weight warning label on the top cover.
c. For standalone libraries, install the cosmetic enclosure (see Figure
1-1 on page 1-4 for screw locations).
Upgrading a 20-Slot Library to 40 or 60 Slots
Connecting the Library Modules
2-13