HP A5585A - SureStore DLT E Tape Library 4/40 Upgrade Kit page 50

TIP
Upgrading a 40-Slot Library to 60 Slots
Connecting the Library Modules
12. Install or replace the cards and drives into both units. Refer to the
pull-out tabs on the back of the library for the card locations.
The number on the cards match the number on the back of the library
chassis.
13. Select the upgrade notice label that is in the appropriate language for
the customer, and install it to the right of the pull-out tabs on the
back of the library (Figure 2-13 on page 2-17). Add the second
upgrade notice label underneath the front left magazine on the lowest
library module.
14. Add the upgrade serial number label to the bottom pull-out tab on the
back of the library.
15. Continue the procedure by referring to "Moving the Front Panel
Components and Display" on page 3-13.
3-12 Chapter 3