Moving The Front Panel Components And Display; Replacing The Display And Viewing Window - HP A5585A - SureStore DLT E Tape Library 4/40 Upgrade Kit
Tape library twenty slot to forty slot upgrade kit - modular scalability guide
Hide thumbs
Also See for A5585A - SureStore DLT E Tape Library 4/40:
- Upgrade and replacement instructions (124 pages) ,
- Overview (2 pages) ,
- User manual (95 pages)
Table of Contents
Advertisement
Figure 2-14
Upgrading a 20-Slot Library to 40 or 60 Slots
Moving the Front Panel Components and Display
Moving the Front Panel Components and
Display
You need to move the front panel display to the top library module to
maintain consistency with the factory configuration. To move the display
to the top module, you will need to exchange the display components
from the existing library with the upgrade module.
Replacing the Display and Viewing Window
1. Install the black RFI display shield to the top module. Two short T-15
screws attach the shield to the library chassis (see Figure 2-14). The
display shield has a larger opening on top to accommodate the
display.
2. Install the black RFI viewing window shield to the lower library
module. Two short T-15 screws attach the shield to the library chassis
(see Figure 2-14).
Installing the RFI Shields
2-18
Chapter 2
Advertisement
Table of Contents
