Connecting The Library Modules - HP A5585A - SureStore DLT E Tape Library 4/40 Upgrade Kit

Connecting the Library Modules

1. Secure the two units together by installing one 10-24 x 0.50 screw
2. Push the library out of the rack, using the lowest library module.
3. Install seven 10-24 x 0.50 screws inside the chassis to secure the two
Figure 2-7 Installing the Screws
Chapter 2
from the upgrade kit behind each cosmetic door (Figure 2-7). You will
need to remove the magazines and use a short T-25 driver to access
these screw holes.
Continue easing the library out of the rack until the library is 2/3 of
the way out of the rack. Do not push the library past the stop bracket.
units together (Figure 2-7).
Upgrading a 20-Slot Library to 40 or 60 Slots
Connecting the Library Modules
2-11