HP A5585A - SureStore DLT E Tape Library 4/40 Upgrade Kit page 11

3. Remove the silver label on top of the library chassis (Figure 1-2). You
Figure 1-2 Removing the Cover
Chapter 1
Remove the top cover from the existing library. Save these screws to
reinstall the vertical lift top cover after the upgrade. Refer to
Figure 1-2 for the screw locations.
• For 40 to 60-slot rackmounted upgrades, you will need to remove
the stop latch bracket to remove the vertical lift cover. See
Figure 2-10 on page 2-14.
• For libraries rackmounted in a 55-mm bezel depth rack, remove
the trim brackets from each side of the library (see Figure 2-11 on
page 2-15 or Figure 3-6 on page 3-10 for the location of the trim
bracket screws). The trim brackets secure the library to the rack.
• Push the library 2/3 of the way out of the rack by using the vertical
handle at the back of the library. Do not push the library past the
stop bracket.
must remove this label to connect the library modules together.
Preparing a 2/20 and 4/40 Library for the Upgrade
Removing the Cosmetic Enclosure and Cover
1-5