5. Go to the front of the library, and pull out the doors on the lowest
6. Behind the doors, loosen the two 10-32 T-25 screws that secure the
Figure 2-20
Removing the Retainer Brackets
7. Turn the service handle counter-clockwise to lower the bottom
8. Gently pull out the bottom library module.
Chapter 2
Removing and Replacing the Transport Assembly (for Model 12/140 only)
module.
retainer bracket on the module to the cabinet.
module. Lower the module all the way down to ensure there is enough
clearance for the vertical lift assembly.
Removing and Replacing Major Library Components
2-43