Figure 2-9 Removing A Drive - HP A5585A - SureStore DLT E Tape Library 4/40 Upgrade And Replacement Instructions

CAUTION
Figure 2-9
Removing and Replacing Major Library Components
Removing and Replacing Drive Modules
5. Lay the connector assembly to the side, allowing the external cables
to hang from the connection(s). Do not disconnect external cables from
the connector plate.
6. Loosen the top and bottom thumbscrews on the drive module (see
Figure 2-9).
7. Using the handle that is mounted on the back of the drive module,
pull the drive module straight out with one hand while supporting
the bottom of the drive module with the other hand.
As the drive module is pulled out, support the bottom of the drive module
to avoid dropping or damaging it.
Removing a Drive
2-24 Chapter 2