Table 2-4 Description Of Cosmetic And Sheetmetal Frus (2 Of 2) - HP A5585A - SureStore DLT E Tape Library 4/40 Upgrade And Replacement Instructions

Table 2-4 Description of Cosmetic and Sheetmetal FRUs (2 of 2)
Callout # Description
1 Library top cover for Model 2/20 (see Figure 2-12 on page 2-31). Includes
eight #4 - 40 x .25 screws to attach.
2 Bezel chin for the lowest library level. Uses 6-32 machine screws to attach.
3 Forehead for library Model 4/40 (see Figure 2-12 on page 2-31). Installed at
the top of the library with four 10-24 T-25 screws.
4 Bezel chin. See "Removing and Replacing the Front Panel Display" on page
2-67. Uses 6-32 machine screws to attach.
5 Forehead for library Models 6/60 and 12/140 (see Figure 2-12 on page 2-31).
Installed at the top of the library with four 10-24 T-25 screws.
6 Lifting strap (used to guide libraries into a rack). Uses 10-24 x .50 screws to
attach.
7 Lifting strap (used to guide libraries into a rack). Uses 10-24 x .50 screws to
attach.
8 Lifting strap for enterprise libraries. Uses 10-24 x .50 screws to attach.
9 Vertical lift cover for multi-level libraries (see Figure 2-12 on page 2-31).
Installed at the top of the library with two 10-24 x .50 screws.
10 Standalone feet. Includes four 10-24 x .50 screws to attach.
11 Standalone cover assembly for Model 2/20: Uses #10-24 x .625 screws to
attach.
Chapter 2
Removing and Replacing Major Library Components
Exploded Views of Replaceable Parts (FRUs)
2-11