Re-Installing The Bottom Module; Figure 2-23 Checking The Module Alignment - HP A5585A - SureStore DLT E Tape Library 4/40 Upgrade And Replacement Instructions

CAUTION
Figure 2-23
Removing and Replacing Major Library Components
Removing and Replacing the Transport Assembly (for Model 12/140 only)
2. When the transport assembly is level with the top of the library,
lower it to the bottom of the library.

Re-installing the Bottom Module

1. After servicing the product, gently push the bottom library module
into the cabinet until it aligns with the module above it.
2. Turn the service handle clockwise to begin raising the module while
you are holding the module flush against the cabinet.
3. When the bottom module is one inch from the module above it, check
to ensure the guide pins are aligned with the holes on the upper
module.
To prevent damaging the library, ensure the modules are aligned with the
guide pins.
4. After ensuring the modules are aligned, continue turning the service
handle clockwise until the modules are engaged and you feel
resistance.
Checking the Module Alignment
2-46 Chapter 2