Replacing The Transport Assembly; Figure 2-22 Transport Assembly Position - HP A5585A - SureStore DLT E Tape Library 4/40 Upgrade And Replacement Instructions

Replacing the Transport Assembly

Install the replacement transport assembly by following these steps:
1. Connect the umbilical cable to the bottom of the library chassis.
CAUTION Use care to protect the flat, umbilical cable attached to the bottom of the
transport assembly. Do not bend the pins.
CAUTION The alignment of the gears with the gear rails is critical. The library will
test to ensure alignment.
Figure 2-22 Transport Assembly Position
A
B
Chapter 2
Removing and Replacing the Transport Assembly (for Model 12/140 only)
a. Align the gears on the transport assembly with the gear rails on
the library (Figure 2-22).
b. Check the gear teeth position to ensure they are aligned with the
gear rails and that the gear rails are level with each other (Figure
2-22).
Gears incorrectly aligned
Gear correctly aligned
Removing and Replacing Major Library Components
1 Gears
2 Gear rails (racks)
3 Check points to ensure
alignment
2-45