Replacing Individual Redundant Power Supply Units - HP A5585A - SureStore DLT E Tape Library 4/40 Upgrade And Replacement Instructions

Replacing Individual Redundant Power Supply Units

To replace individual power supply units:
1. Push the tab on the power supply unit to the left.
2. Remove the supply using the handle on the back of the unit and
Avoid touching the top surface of the power supply unit since it
WARNING
may be hot.
Chapter 2
Level of Difficulty: [1] Easy
pulling outward. Support the bottom of the power supply to avoid
dropping or damaging it.
Removing and Replacing Major Library Components
Removing and Replacing the Redundant Power Supply
2-63