NOTE
Downloading Firware and Interpreting LEDs
Upgrading Firmware
Upgrading Firmware
This section details the processes for upgrading library and drive
firmware. The processes used for upgrading library firmware and drive
firmware are different.
Firmware can be downloaded by:
• Using the remote management card (library only)
• Using a firmware upgrade tape (drive only)
• Using a CE diagnostic tool (drive and library)
Checking the Firmware Revision
Regardless of whether or not you have the latest firmware, if the library
is in a partial availability state due to a firmware mismatch, new
firmware must be downloaded to resolve the condition.
Check your current firmware revisions by following these steps:
1. Ensure the library is powered on.
2. Use the following menu from the front panel:
->
Main Menu
->
Information
Firmware Revisions
3. From the
Firmware Revisions
firmware revisions.
3-2
menu, use
to view the drive
[More]
Chapter 3