Restoring The Controller Configuration - Cisco 521G - Unified IP Phone VoIP Configuration Manual

Restoring the Controller Configuration

Figure 6-9
Click OK.
Step 6
If you started the backup process by clicking the Launch Configuration Archive button, the Restart/Reset
Step 7
window reappears. To continue resetting the controller to factory defaults, go to
process.

Restoring the Controller Configuration

To restore a previously backed up controller configuration, follow these steps:
On CCA Release 1.5, the CCA restore function only supports backup files created using CCA
Note
Release 1.5. You cannot use backup files created with CCA Release 1.1. CCA Release 1.1 supports
binary configuration files, but CCA Release 1.5 and higher supports XML configuration files.
Click Maintenance > Configuration Archive and
Step 1
Cisco 500 Series Wireless Express Mobility Controller Configuration Guide
6-8
Chapter 6
Backup Complete Message
Restarting, Resetting, Backing Up, and Restoring the Controller
Figure 6-10 appears.
Step 4 of the reset
OL-15283-01