Connecting To A Community - Cisco 521G - Unified IP Phone VoIP Configuration Manual

Connecting To a Community

Figure 3-5
Click Ok.
Step 10
Connecting To a Community
When you connect to a community, you can use CCA to communicate with and manage all of the
members. To connect to a community using the Connect window, follow these instructions:
Step 1 Check Connect to in the Connect window (see
Click the drop-down arrow and choose from the list of configured communities (see
Step 2
Cisco 500 Series Wireless Express Mobility Controller Configuration Guide
3-6
Discovered Community Devices
Chapter 3 Creating and Connecting to a Community
Figure 3-1).
Figure 3-6).
OL-15283-01