Cisco 521G - Unified IP Phone VoIP Configuration Manual page 33

Chapter 2 Adding a WLC526 Controller and LAP521 Access Points
Figure 2-9
Perform these operations:
Step 8
Accept the default setting to synchronize the controller time with your PC, or uncheck the
a.
Synchronize with PC box.
If you unchecked the Synchronize with PC checkbox, configure the month, date, year, hour and
b.
minute by clicking the appropriate drop-down arrows and choosing the desired settings.
Accept the default US country code or click the drop-down arrow and choose the desired country
c.
code setting.
Click Next and the Step 8 Management and AP Manager Interface Information window appears
d.
(see
Figure 2-10
OL-15283-01
Step 7 Enter Device Setup Parameters Window
Figure 2-10).
Step 8: Management and AP Manager Interface Information Window
Cisco 500 Series Wireless Express Mobility Controller Configuration Guide
Adding a New Controller
2-7