Restarting The Controller Using Cca - Cisco 521G - Unified IP Phone VoIP Configuration Manual

Restarting the Controller Using CCA

Figure 6-1
For your controller, check Restart.
Step 2
been checked.
Figure 6-2
Step 3 If you need to restart another controller, click Apply and return to
Click OK and a pop-up message appears (see
Step 4
reload in approximately 1 minute. The message also indicates that you might need to refresh the CCA
screen by clicking Application > Refresh after the controllers are restarted.
Cisco 500 Series Wireless Express Mobility Controller Configuration Guide
6-2
Chapter 6
Restart and Reset Device Selections
Figure 6-2
Restart Check Box
Restarting, Resetting, Backing Up, and Restoring the Controller
appears and shows the controller restart check box has
Step 2.
Figure 6-3). The message indicates the controller(s) will
OL-15283-01