Cisco 521G - Unified IP Phone VoIP Configuration Manual page 99

Chapter 8 Adding Employee Access with Web Authentication
Perform these steps:
Step 4
In the VLAN ID field, enter the VLAN ID that you want to associate with the employee access
a.
VLAN. Use an ID in the range 2 to 1000. Do not enter 1; this ID is reserved.
In the VLAN Name field, accept the default name or enter a different name for the VLAN.
b.
From the Port list, select a port (1 or 2) for the VLAN. The default is 1.
c.
In the IP Address field, enter an IP address for the VLAN.
d.
e. From the Subnet Mask list, accept the default or click the drop-down arrow and choose the subnet
mask for the VLAN. The default is 255.255.255.0.
In the Gateway IP Address field, enter the IP address of the default gateway.
f.
In the DHCP Server IP Address field, enter the IP address of the DHCP server.
g.
Figure 8-3
h. When you complete this window (see
window. A create VLAN pop-up message
Figure 8-4
Step 5 Click OK and
OL-15283-01
Typical Employee Access VLAN Data
Create VLAN Pop-Up Message
Figure 8-5 appears and lists the new employee VLAN.
Cisco 500 Series Wireless Express Mobility Controller Configuration Guide
Figure 8-3), click OK to save your changes and to close the
(Figure 8-4) appears.
Adding an Employee Access VLAN
8-3