Cisco 521G - Unified IP Phone VoIP Configuration Manual page 78

Restoring the Controller Configuration
Figure 6-12
Figure 6-12
Choose one of the listed backup-configurations by clicking the controller's hostname. Review the
Step 5
backup note field for information about the backup configuration.
Click Restore and a progress bar appears indicating the restore progress. A description above the restore
Step 6
progress bar indicates the controller being restored. This will take a few minutes to complete.
When the restoration is complete, a pop-up message appears (see
controller was successfully restored and has been rebooted.
Figure 6-13
Click OK on the pop-up message.
Step 7
If you need to restore another controller, repeat Steps 3 to 7.
Step 8
Cisco 500 Series Wireless Express Mobility Controller Configuration Guide
6-10
appears.
Restore Window with the Chosen Selection
Configuration Archive Pop-Up Message
Chapter 6 Restarting, Resetting, Backing Up, and Restoring the Controller
Figure 6-13) and indicates the
OL-15283-01