Using Cca To Convert An Ap521 Access Point - Cisco 521G - Unified IP Phone VoIP Configuration Manual

Using CCA to Convert an AP521 Access Point

Figure B-4
Click on the target access point to highlight the line.
Step 3
You can choose multiple AP521 access points by pressing the shift or control key on your PC keyboard
while clicking multiple access points.
Note
Figure B-5
Cisco 500 Series Wireless Express Mobility Controller Configuration Guide
B-4
Convert to LAP Window
When converting multiple autonomous access points, your DHCP server must be able to handle
multiple requests and sessions simultaneously.
Highlighted Access Point
Appendix B Converting an Autonomous Access Point
Figure B-5 appears.
OL-15283-01