Table of Contents
Advertisement
Chapter 9
Adding Voice Access with Web Authentication
c.
Skip to
If you choose WPA-PSK, WPA2, or WPA2-PSK security, perform these steps:
Step 8
Click the Encryption drop-down arrow and choose aes or tkip (see
a.
Note
Enter the WPA pre-shared key (8 to 63 characters long).
b.
Figure 9-15
Step 9
From the Voice CAC type area, select Wireless MultiMedia Policy, which requires client devices to
use WMM, or select 7920 CAC (AP and Client), which supports Cisco 7920 IP telephones on your
network. The default setting is Wireless Multimedia Policy.
Note
Step 10
When finished, click OK and the WLANs Window
added.
OL-15283-01
Step 9
to finish the configuration.
The authentication is WPA-PSK, WPA2-PSK, or WPA2-PSK, corresponding to the security
type.
Configuring WPA2-PSK Security Type
Do not select Wireless Multimedia Policy if you use Cisco 7920 phones on your network.
Cisco 500 Series Wireless Express Mobility Controller Configuration Guide
Creating a New SSID for the Voice VLAN
Figure
(Figure
9-16) reappears with the voice WLAN SSID
9-15).
9-11
Hide quick links:
Advertisement
Chapters
Table of Contents
