Cisco 521G - Unified IP Phone VoIP Configuration Manual page 42

Creating a Community of Devices Using the Connect Window
Figure 3-2
Enter the community name in the Name field (up to 64 characters, A-Z, a-z, 0-9, hyphen, and
Step 3
underscore).
(Optional) Enter your company name, your organization, or any other identifying text in the Company
Step 4
Name field. The text is used as the default SSID (service set identifier) for your network.
Step 5 CCA uses the information from the Discovery option to discover devices and their neighbors using the
Cisco Discovery Protocol (CDP). The discovered devices and their neighbors are added to your
community. Choose a discover option by clicking the drop-down arrow in the Discover field and enter
the requested information as listed below:
–
–
–
–
Click Start. CCA begins the discovery process and displays a progress bar. When devices are
Step 6
discovered, CCA includes the discovered devices in the Device table.
If a pop-up window appears that indicates the expected amount of time for the discovery process, click
Step 7
Yes or No to continue.
Cisco 500 Series Wireless Express Mobility Controller Configuration Guide
3-4
Create Community Window
A single device by IP address—Enter the IP address of the device you want CCA to discover.
Devices using a seed IP address—(default) Enter the IP address of a device with neighbors that
you want CCA to discover.
Devices on a subnet—Enter the IP address and a subnet mask.
Devices in an IP address range—Enter the start and end IP addresses of the range.
Chapter 3 Creating and Connecting to a Community
OL-15283-01