Cisco 521G - Unified IP Phone VoIP Configuration Manual page 88

Creating a New SSID for the Guest VLAN
–
Figure 7-11
Web Authentication is selected.
•
The Security Type field is automatically set to No Security.
•
No encryption is configured.
•
Open authentication is configured.
•
Perform these steps:
Step 4
a. Accept the default guest WLAN SSID or enter a new SSID (see
to 32 alphanumeric characters.
Figure 7-12
Accept or uncheck the default Broadcast in Beacon setting. When checked, the guest WLAN SSID
b.
is broadcast in beacon messages so that the devices that do not specify an SSID can associate
(establish a wireless connection) with the access point. Only the guest SSID can be included in the
beacon.
When finished, click OK and WLANs Window
c.
added.
Cisco 500 Series Wireless Express Mobility Controller Configuration Guide
7-8
If you click the Add VLAN button,
VLANs has been reached.
Add VLAN Pop-Up Message
New Guest SSID Configured
Chapter 7 Adding Guest Access with Web Authentication
Figure 7-11 appears indicating the maximum number of
Figure
(Figure 7-13) reappears with the new guest WLAN
7-12). The SSID can be up
OL-15283-01