Cisco 521G - Unified IP Phone VoIP Configuration Manual page 59

Chapter 4 Creating and Modifying WLANs and VLANs
Figure 4-15
Step 5 If you need to add more VLANS, click Apply and repeat Steps 2 through Step 4.
When you have finished adding VLANs, click OK.
Step 6
If CCA detects an error or a conflict with a settings already configured in the switch, a pop-up message
Step 7
appears indicating you should revise the field indicated with a red box. Make necessary corrections and
click OK.
If a pop-up message appears (see
Step 8
will be updated, click OK.
Figure 4-16
When a pop-up message appears (see
Step 9
VLAN data, click Yes or No.
OL-15283-01
VLANs Window with the New VLAN
Figure 4-16) that indicates the corresponding VLANs in all switches
VLANs Pop-Up Message
Figure
Cisco 500 Series Wireless Express Mobility Controller Configuration Guide
4-17) that asks if you want to create an SSID using the
Adding a VLAN
4-13