Extending Variable Loading Floor With Integrated Aluminium Rails And Faseting Elements (Superb Combi); Partial Extension Of Variable Load Floor; Divide Boot - Skoda Superb 2014 Owner's Manual

Table of Contents

Advertisement

WARNING
Ensure that the carrier rails and variable loading floor are correctly fastened
when installing the variable loading floor. If this is not the case, there is a
risk of injury for the occupants.
Extending variable loading floor with integrated aluminium rails
and faseting elements (Superb Combi)
Introduction
This chapter contains information on the following subjects:
The variable loading floor makes handling of bulky items of luggage easier.
CAUTION
The maximum permissible load of the variable loading floor is 75 kg.
Note
The space below the variable loading floor can be used for stowing objects, for
example the fastening elements, removed foldable boot cover, etc.

Partial extension of variable load floor

Fig. 112 Boot: partially pulling out the variable loading floor
Read and observe
The variable loading floor can be partially pulled out over the rear bumper.
Grasp the rear of the variable loading floor by the handle and lift gently in the
direction of the arrow
Extend the variable load floor over the bumper in the direction of the arrow
until it engages in the opening
2
The variable loading floor which is pulled out in such a way is solely used as a
seat, for example for changing shoes.
To push in the rear section of the variable loading floor, grasp by the handle
and lift slightly in the direction of the arrow
Slide the variable load floor forward up to the stop.
103
103
When pulling out the variable loading floor, the front edge (close to the rear
104
seats) is lifted at the same time. Thus, small objects can no longer fall into the
104
space between the boot floor and the variable loading floor.
105
CAUTION
Ensure that the raised front edge of the variable loading floor is not damaged.

Divide boot

Read and observe
The boot can be divided with the variable loading floor.
Grasp the rear of the variable loading floor by the handle and lift in the direc-
tion of the arrow
» Fig. 112
1
Insert the trailing edge in one of the openings
The variable loading floor is secured in the openings
on page 103 first.
» Fig.
112.
1
.
C
.
1
Fig. 113
Dividing the boot
on page 103 first.
on page 103 .
» Fig.
A
against movement.
A
Seats and useful equipment
113.
103

Advertisement

Table of Contents
loading

This manual is also suitable for:

Superb

Table of Contents