Wren Kitchens INFINITY Fittings Manual page 3

600 tower including 2 door + 2 or 3 bin

Hide thumbs Also See for INFINITY:

Positioning the leg brackets

Locate the leg brackets and position, as

shown in the diagram. Ensure the leg

brackets are rotated so the flange covers the

outer edge, as this provides support for the

edge of the unit.

Fixing the leg bases

Secure each of the leg brackets into place

with 4x15mm screws per bracket.

Inserting the legs

Push each leg firmly down into the leg

bracket. Adjusting each leg to 155mm.

Adjust the legs to the correct height by

turning clockwise or anti-clockwise.

Page 3

Need help?

Do you have a question about the INFINITY and is the answer not in the manual?

Infinity plus