Wren Kitchens INFINITY Fittings Manual page 2

Remember to take care when unpacking. Please keep your workspace clean, clear
and tidy when working. This will help keep all items safe from any damage. Any
un-needed cardboard or plastic should be flattened down and placed in the bin.
A minimum of two people will be needed to lift the unit.
Removing the frontal
Before installing the unit, remove the frontal
by pulling the release catch.
Place the frontal in the door safe along its
longest length.
Removing the fixtures and fittings
Remove all content so the unit is empty
To remove the bins from inside the unit, pull
out the door and lift the bins out.
Take all fixtures and fittings out of the unit.
These should be kept on a clean and level
surface and grouped by product.
Place the shelves in the door safe along their
longest lengths.
Taping the frontal
Add low-adhesive masking tape to the front
of the unit over the frontal. This is to prevent
the bin mechanism from moving while
fitting the unit.
Page 2