Customising Your Copier; Programmable Features - Xerox XC811 Manual

Customising Your Copier

Programmable Features

The default settings for various copier features may be changed to suit
your needs.
Each of the programmable features, along with its program number and
options are contained in the chart below. The procedure to change these
settings follows the chart.
Feature
Priority Tray: This feature allows you
to set the default paper tray.
Auto Clear Time out: This feature
allows you to select the time it takes
for the copier to return to the normal
copy mode after a copy cycle is
complete.
Time out to Power Save: This
feature allows you to select the delay
before the machine switches into
Power Save mode.
Time out to Power Shut-off: This
feature allows you to select the delay
before the machine switches into
Power Shut-off mode.
Default Magnification: This feature
allows you to make copies slightly
larger or smaller than the original, or
the same size.
Default Exposure: This feature
allows you to select the default
Exposure mode.
26
Prog- Option Number
ramme
* Default
No
0 0 – Main Tray *
1 – Alternate Paper
Tray
1 0 – Off
1 – 30 seconds
2 – 60 seconds *
3 – 90 seconds
4 – 120 seconds
2 0 – Off*
1 – 45 seconds
2 – 90 seconds
3 – 2 minutes
4 – 5 minutes
3 0 – 2 minutes
1 – 5 minutes
2 – 15 minutes
3 – 30 minutes
4 – 60 minutes
5 – 120 minutes
6 – Off*
4 0 – 100% *
1 – 99%
2 – 101%
5 0 – Auto Exposure *
1 – Text