Before You Begin; See The Configuration File - Watchguard Firebox X15 User Manual

Configuration and Management Basics

Before You Begin

Do not edit your configuration file manually. Always use a WatchGuard Management Server or the
Firebox X Edge web interface to make changes to your configuration.
User passwords in the backup configuration file are encrypted, but the full file is not encrypted. We
recommend that you encrypt your backup configuration file and keep it in a safe location.
When you restore your previous configuration from a backup configuration file, the administrator user
name and password used when the backup file was created are used again. If you do not remember
the password set in your backup file, you must restore the factory-default settings and set up the Edge
manually.

See the Configuration File

You can see the contents of the Firebox X Edge configuration file in text format from the View Configuration
File page.
1. To connect to the System Status page, type
of the Firebox X Edge trusted interface.
The default URL is: https://192.168.111.1
2. From the navigation bar, select Administration > View Configuration.
The configuration file is shown.
42
in the browser address bar, and the IP address
https://
Firebox X Edge e-Series