Create Manual VPN tunnels on your Edge
1. To connect to the System Status page, type
of the Firebox X Edge trusted interface.
The default URL is: https://192.168.111.1
2. From the navigation bar, select VPN > Manual VPN.
The Manual VPN page appears.
3. Click Add.
The Add Gateway page appears.
4. Type a name for your tunnel. This name is used for identification only.
5. The Credential Method is set to Shared Key and can be changed only if you have imported a remote
VPN gateway certificate. For more information on third-party certificates, see
The shared key is a passphrase that the devices use to encrypt and decrypt the data on the VPN tunnel.
The two devices must use the same passphrase, or they cannot encrypt and decrypt the data correctly.
User Guide
Branch Office Virtual Private Networks
in the browser address bar, and the IP address
https://
About
certificates.
257