Watchguard Firebox X15 User Manual page 124

Wireless Setup
5. If you want to configure the Edge as a DHCP server when a wireless device tries to make a connection,
select the Enable DHCP Server on Wireless Guest Network check box. To learn more about
configuring the settings for the DHCP Server, see
6. To configure the Edge to send DHCP requests to a DHCP server external to the Edge, select the Enable
DHCP Relay check box. For more information about this feature, see
7. If you use WebBlocker and want to apply a WebBlocker profile for all wireless connections that use the
wireless guest network, select the profile you want to apply from the WebBlocker Profile drop-down
list.
8. On the Wireless tab, select the security settings for the wireless guest network. You must select
whether you want wireless users to be able to send traffic to each other when they are connected to
the wireless guest network. To have wireless guest users be able to send traffic to each other, make
sure the Prohibit client to client wireless network traffic check box is clear. Other configuration
options are described earlier in this chapter.
9. Use the Allowed MAC Addresses tab if you want to restrict wireless connections so that only wireless
devices with a MAC address you add to the Edge configuration can connect to the Edge wireless guest
network. For more information on restricting access by MAC address, see
interface by MAC
10. Click Submit to save your configuration to the Edge.
112
address.
Enable DHCP server on the trusted
Make the Firebox a DHCP
Restrict access to the trusted
network.
relay.
Firebox X Edge e-Series