Dns Settings; Dial-Up Settings - Watchguard Firebox X15 User Manual

Network Settings

DNS settings

If your dial-up ISP does not give DNS server IP addresses, or if you must use a different DNS server, you can
manually enter the IP addresses for a DNS server to use after failover occurs.
1. Select the Manually configure DNS server IP addresses check box.
2. In the Primary DNS Server text box, type the IP address of the primary DNS server. If you have a
secondary DNS server, type its IP address in the Secondary DNS server text box.
3. If necessary, change the MTU setting. Most users do not have to change this setting.
4. Click Submit, or select a different tab to change more settings.

Dial-up settings

1. In the Dial up timeout text box, type the number of seconds before a timeout occurs if your modem
does not connect.
2. In the Redial attempts text box, type the number of times the Edge tries to redial if your modem does
not connect.
3. In the Inactivity Timeout text box, type the number of minutes to wait if no traffic goes through the
modem before a timeout occurs.
4. Use the Speaker volume control to set your modem speaker volume.
5. Click Submit, or select a different tab to change more settings.
100 Firebox X Edge e-Series