Enable Mobile Vpn With Ssl For A Firebox User; Client Requirements - Watchguard Firebox X15 User Manual

About Mobile VPN with SSL

Client requirements

The WatchGuard Mobile VPN with SSL product supplies a VPN client for all Firebox X e-Series devices. It does
not provide endpoint security.
You can install the Mobile VPN with SSL client software on computers with the following operating systems:
Microsoft Windows Vista (32 bit)
Microsoft Windows XP (32 bit)
Microsoft Windows 2000
Mac OS X, versions 10.3 through Leopard
If the client computer is running Windows Vista or Windows XP, you must log on using an account that has
administrator rights to install the Mobile VPN client software. Administrator rights are not required to connect
after the client has been installed and configured.
If the client computer is running Mac OS X, admin rights are not required to install or to run the client.

Enable Mobile VPN with SSL for a Firebox user

When you enable Mobile VPN with SSL on your Edge, you must enable access for each remote user who uses
SSL to connect to the Edge.
1. To connect to the System Status page, type
of the Firebox X Edge trusted interface.
The default URL is https://192.168.111.1
2. From the navigation bar, select Firebox Users.
The Firebox Users page appears.
3. Below Local Users Accounts, click the Edit button to edit an existing user account, or Add to add a new
user account.
4. From the New or Edit page that appears, select the Allow remote access with Mobile VPN with SSL
check box.
290
in the browser address bar, and the IP address
https://
Firebox X Edge e-Series