About Webblocker Profiles; Create A Webblocker Profile - Watchguard Firebox X15 User Manual

WebBlocker
Install Quarantine Server and WebBlocker Server
Double-click
WGEdge10QWB.exe
password to run the installer on some operating systems. Follow the instructions to install the software:
WatchGuard WebBlocker and Quarantine Server for Edge Setup
Click Next to start the wizard.
Read the license agreement
Select the Accept radio button, then click Next.
Set the destination folder
Click Browse to select a location to install the software, or click Next.
Select the components to install
Both servers are installed by default. If you do not want to install a server, clear the adjacent check
box. When you are finished, click Next.
Configure WatchGuard Toolbar
Follow the instructions on the screen to activate your WatchGuard Toolbar. When you are finished,
click Next. After the installation, you can start and stop the WebBlocker Server or the Quarantine
Server with the WebBlocker Server and Quarantine Server icons on your WatchGuard Toolbar.
WatchGuard WebBlocker and Quarantine Server for Edge Setup
Click Finish to close the wizard.

About WebBlocker profiles

A WebBlocker profile is a set of restrictions you apply to users or groups of users on your network. You can
create different profiles, with different groups of restrictions. For example, you can create a profile for new
employees with more restrictions than for other employees. It is not necessary to create WebBlocker profiles
if you use one set of WebBlocker rules for all of your users.
After you create profiles, you must apply them when you set up Firebox X Edge user accounts. Even if you have
only one set of WebBlocker rules, you must choose to apply the WebBlocker rules to each new user or group
you create as described in

Create a WebBlocker profile

1. To connect to the System Status page, type
of the Firebox X Edge trusted interface.
The default URL is: https://192.168.111.1
2. From the navigation bar, click WebBlocker > Profiles.
The Profiles page appears.
210
to start the setup wizard. You may need to type a local administrator
Create a WebBlocker profile.
https://
in the browser address bar, and the IP address
Firebox X Edge e-Series