Add A Group For Ldap Authentication - Watchguard Firebox X15 User Manual

User and Group Management

Add a group for LDAP authentication

1. To connect to the System Status page, type
of the Firebox X Edge trusted interface.
The default URL is: https://192.168.111.1
2. From the navigation bar, select Firebox Users > New Group.
The Firebox Users New Group page appears.
3. In the Account Name text box, type the name of the new group. This name must match the name of
a group in the LDAP directory. This name must contain only letters, numbers, and the underscore (_)or
dash (-) characters. Spaces are not permitted.
4. In the Description text box, you can enter a description of the group. This field is optional.
5. From the Administrative Access drop-down list, select the level of Firebox X Edge administrative
access to assign to the group. You can select:
o None - The members of the group have no access to Firebox X Edge administration functions.
o Read-only - The members of this group can see, but not change, Firebox X Edge configuration
and status.
o Full - The members of this group have full Firebox X Edge administrative privileges.
6. Use the Session maximum time-out text box to set the number of minutes a user session started by
a member of this group is allowed to stay active. When this limit occurs, the Firebox X Edge will close
the session.
7. Use the Session idle time-out text box to set the number of minutes a user session started by a
member of this group can stay idle before it is automatically closed by the Firebox X Edge.
8. Select the Allow access to the External Network check box to allow the members of this group to
access the external network through the Firebox X Edge.
198
in the browser address bar, and the IP address
https://
Firebox X Edge e-Series