Set Access Control Options; Use A Policy To Manage Manual Vpn Network Traffic - Watchguard Firebox X15 User Manual

To add or edit a custom proxy policy:
1. To connect to the System Status page, type
of the Firebox X Edge trusted interface.
The default URL is: https://192.168.111.1
2. From the navigation bar, select Firewall Settings > Outgoing.
3. In the Custom Proxy Policies section, click Add Proxy Policy.
The Add Policy - Custom Policy page appears.
4. In the Policy Name text box, type a name to identify your custom proxy policy.
5. From the Protocol drop-down list, select the protocol you want to manage.

Set access control options

On the Outgoing or Incoming tab, you can set rules that filter IP addresses, network addresses, or host ranges.
This is the same functionality you have in packet filter policies.
1. Select the Outgoing tab.
2. From the Outgoing Filter drop-down list, select Deny, Allow, or No Rule.
3. Use the From drop-down list to add the IP address, network address, range of IP addresses of
computers on the trusted or optional network, or an alias for which this policy applies.
Network IP addresses must be entered in slash notation (also known as Classless Inter Domain Routing or CIDR
notation). For more information, see
4. Click Add. The From text box shows the IP addresses you added. The From text box can have more
than one entry.
5. Use the To drop-down list to add the IP address, network address, range of IP addresses of computers
on the external network, or alias for which this policy applies.
Network IP addresses must be entered in slash notation.
6. Click Add.
To add additional IP addresses, repeat steps 3–6.

Use a policy to manage manual VPN network traffic

1. To connect to the System Status page, type
of the Firebox X Edge trusted interface.
The default URL is: https://192.168.111.1
2. From the navigation bar, select Firewall > Outgoing or Firewall > Incoming.
The Filter Outgoing Traffic or Filter Incoming Traffic page appears.
3. Create a new policy, or click the Edit button adjacent to an existing policy.
4. Select the Apply to a Manual VPN check box.
5. To apply the policy to a single VPN tunnel, select the tunnel name from the adjacent drop-down list.
To apply the policy to all VPN tunnels, select All Gateways.
6. Click Submit to save your changes.
User Guide
in the browser address bar, and the IP address
https://
About Slash Notation.
in the browser address bar, and the IP address
https://
Proxy Settings
129