Local User Account - Watchguard Firebox X15 User Manual

Stop a session
The Firebox X Edge e-Series monitors and records the properties of each user session.
If the Automatic Session Termination time limit for all sessions is reached, or if the Firebox X Edge restarts, all
sessions are stopped at the same time. The Edge administrator also can use the Firebox Users page to stop a
session.
To stop a session manually:
1. To connect to the System Status page, type
of the Firebox X Edge trusted interface.
The default URL is: https://192.168.111.1
2. From the navigation bar, select Firebox Users.
The Firebox Users page appears.
3. In the Active Sessions list, click the Close button adjacent to the session you want to stop. To stop all
sessions, click the Close All button.
If user authentication is enabled for external network connections, a session stops when one of these events
occurs:
The idle timeout limit set for that account is reached.
The maximum time limit set for that account is reached.
The authenticated user manually stops the session. To stop the session, the user clicks the Logout
button on the Login Status dialog box and closes all open browser windows.

Local User account

Below Local User Accounts, you can see information on the users you configured:
Name: The name given to the user. The Admin user is part of the default configuration and cannot be
deleted.
Admin Level: You can set the user permissions to Full, None, or Read-only.
Options: You can configure a user to use WebBlocker, MOVPN (Mobile VPN with IPSec), PPTP (Mobile
VPN with PPTP) and SSL (Mobile VPN with SSL).
If local user accounts are enabled, you also see information about Internet and VPN access rights.
User Guide
in the browser address bar, and the IP address
https://
User and Group Management
205