Add Or Edit A Policy For 1-To-1 Nat - Watchguard Firebox X15 User Manual

Traffic Management

Add or edit a policy for 1-to-1 NAT

1. To connect to the System Status page, type
of the Firebox X Edge trusted interface.
The default URL is: https://192.168.111.1
2. From the navigation bar, select Firewall > Incoming.
The Filter Incoming Traffic page appears.
3. Adjacent to an existing policy you want to change, click Edit.
To add a custom packet filter or proxy policy, click Add Packet Filter Policy or Add Proxy Policy.
4. On the Incoming tab, select 1-to-1 NAT from the Policy Host drop-down list. If you have more than
one secondary external IP address configured, select the IP address pair you want to associate with the
policy from the adjacent drop-down list.
5. If this is an existing policy, click Submit.
If this is a new custom packet filter or proxy policy, use the instructions in
custom policy
176
or Add or Edit a Proxy Policy
in the browser address bar, and the IP address
https://
to configure the other settings.
Filter incoming traffic for a
Firebox X Edge e-Series