Opening A Configuration From The Firebox; Opening A Configuration From A Local Hard Disk - Watchguard Firebox X1000 User Manual

Chapter 4: Firebox Basics
4
From the Firebox Manager, click the Policy
Manager icon (shown at right).
You can now either open a configuration from the
Firebox or from the local hard disk, as explained
in the next two sections.

Opening a configuration from the Firebox

From Policy Manager:
1
Select File = > Open => Firebox.
The Firebox drop-down list, as shown in the following figure,
appears.
2
Use the Firebox drop-down list to select a Firebox.
You can also type in the IP address or host name.
3
In the Passphrase text box, type the Firebox status
(read-only) passphrase. Click OK.
Do not use the configuration passphrase to connect to the
Firebox.
4 If you want, enter a value in the Timeout field to
specify the duration in seconds that the management
station waits for a response from the Firebox before
returning a message indicating that the device is
unreachable.
Opening a configuration from a local hard
disk
1
Select File = > Open => Configuration File.
2
Locate and select the configuration file to open. Click
Open.
50 WatchGuard Firebox System