Expobar ZIRCON MINI 1GR CONTROL Service Manual page 29

PROGRAMMING
Service: service alert
Service
NNNN
Fig. 06
Total coffees dispensed
Coffees Hot Water
NNNNN NNNNN
Fig. 07
Number of coffees dispensed per button
Dose type Gr:N
NNNNN
Fig. 08
Coffees Hot Water
Totals reset
Fig. 09
This counter displays the number of coffees/infusions (individual servings) dispensed by
the machine (see g. 06).
How to access it: Press the Continuous Dispensing button
is displayed.
To exit and access the next menu, press the Continuous Dispensing button
Use the Maintenance cycles option in service programming mode to program the
number of servings after which the machine alerts the user of the need to service the
machine.
To reset the servings counter:
Switch off the machine at the power switch.
Simultaneously press and hold down the 1 Short Espresso
Espresso buttons then turn on the machine.
This counter tots up all the drinks dispensed by the machine (see g. 07).
It cannot be reset. The left-hand side of the display shows the total number of coffees
dispensed while the right-hand side shows the total number of cups of hot water
dispensed.
How to access it: Press the Continuous Dispensing button
counter is displayed.
To exit and access the next menu, press the Continuous Dispensing button
This counter displays the total number of coffees/infusions dispensed per option (see
g. 08).
The upper left-hand part of the display shows the dose type dispensed (espresso,
coffee, 2 espressos, 2 coffees, continuous dispensing, or hot water), while the right-
hand side shows the dispensing group. The lower part of the display shows the counter.
To reset the counters:
When the display shows the Total coffees/infusions dispensed, simultaneously hold
down the 2 Short Espressos
seconds. The display will show the message "Totals reset" (see g. 09).
and 2 Long Espressos
ZIRCON
when the litre counter
again.
and 1 Long
when the Service
again.
buttons for 4
29
R