Expobar ZIRCON MINI 1GR CONTROL Service Manual page 28

PROGRAMMING
Accessing the counters
Dose programming
Select 30 s
Fig. 02
Set clock
Fig. 03
Counters
Fig. 04
Litre counter
Litres
NN
Fig. 05
28
R
With the machine switched ON, hold down the Continuous Dispensing button
for over 8 seconds (until the "Dose programming" menu is displayed, see
g. 02).
Hold down the Continuous Dispensing button
displayed (see g. 03).
Brie y press the Continuous Dispensing button
"Counters" option (see g. 04).
This counter displays the water volume in litres dispensed by the machine. It is
principally used to monitor water-softener regeneration cycles.
How to access it: When "Counters" is displayed, press the 2 Short Espressos button
. The display will show the number of litres of water dispensed by the machine
(see g. 05).
To exit and access the next menu, press the Continuous Dispensing button
Use the Water lter: water-softener regeneration option in service programming mode
to program the number of litres of water after which the machine displays the water-
softener regeneration alert. The counter tops up the litres of water dispensed by the
machine and alerts the user when it is time to regenerate the water softener.
To reset the litre counter:
Switch off the machine at the power switch.
Simultaneously press and hold down the 2 Short Espressos
Espressos buttons then turn on the machine.
ZIRCON
until the "Set clock" menu is
. The display will show the
and 2 Long
.