Humanscale efloat next Assembly Instructions Manual page 41

12
Slide the Control Box onto the frame (12a), oriented with the (AC) Port for the power cord
facing the center of the table (12b).
13
Secure the hand switch to the worksurface in your desired location using the (2) #8-3/4"Flat
Head Wood Screws along the front edge of worksurface. If using a Humanscale Universal
Worksurface, pilot holes are positioned on the left/right hand side of the worksurface in our
recommended location(s).
12a
12b
(AC) Port facing
center of table
41