Humanscale efloat next Assembly Instructions Manual page 29

Before Getting Started
If using a power drill, use a low torque setting.
• Do assemble product on a protective surface.
• Two or more people may be required to maneuver the table.
• After assembly, the table will need to have an initial set up/reset performed before table can be used.
Tools Required
1
Philips Head Screw Driver
Parts Included
1
(2) Leg
6
(2) Feet
11
Humanscale
Worksurface
(CONFIGURATION SPECIFIC,
PACKAGED SEPARATELY)
Hardware Included
1 2
(14) M6 x 14
Machine Screws Machine Screws
2
Power Drill with Philips Driver bit
2
(1) Leg with Glide
7 8
(1) Control
Box
13
12
Humanscale
Worksurface
(CONFIGURATION SPECIFIC,
PACKAGED SEPARATELY)
3
(12) M6 x 10 (13) ST5 x 20
Wood Screws
3 4
(1) Frame
9
or
(1) Hand
Switch
(2) Mending Plates
Includes (8)
N10 x 0.625"
Wood Screw
(CONFIGURATION SPECIFIC,
PACKAGED
SEPARATELY WITH RETURN
WORKSURFACE)
4
(17) #8-3/4 Flat Head
Wood Screw
3
Measuring Tape
5
(2) Long Wing (1) Short Wing
Brackets
10
(1) Power (2) Connecting
Supply
5 6
(15) Cable Ties
Bracket
Cable
(1) 4mm Allen
Key
29