Humanscale efloat next Assembly Instructions Manual page 15

8
Slide the Control Box onto the frame (8a), oriented with the (AC) Port for the power cord
facing the center of the table (8b).
9
Secure the hand switch to the worksurface in your desired location using the (2) #8-3/4"Flat
Head Wood Screws along the front edge of worksurface. If using a Humanscale Universal
Worksurface, pilot holes are positioned on the left/right hand side of the worksurface in our
recommended location(s).
8a
8b
(AC) Port facing
center of table
15