Wren Kitchens INFINITY Base Unit Fittings Manual page 2

Remember to take care when unpacking. Please keep your workspace clean, clear
and tidy when working. This will help keep all items safe from any damages. Any
un-needed cardboard or plastic should be flattened down and placed in the bin.
A minimum of two people will be needed to lift the unit.
Removing the frontal
Before installing the unit, remove the frontal
by pulling the release catch.
Place the frontal in the door safe along its
longest length.
Removing the fittings
Remove all content so the unit is empty.
All fittings should be kept on a clean and level
surface and the shelf placed in the door safe
along its longest length.
Taping the LeMans
Add low adhesive masking tape to the front
of the unit. This is to secure the LeMans from
moving while fitting the unit.
Page 2