GE Monitor UPC-900 Operating Instructions Manual page 31

4 Installation
About this chapter
This chapter provides required information to enable users and service personnel to
unpack, install, move and transport Monitor UPC-900.
Precautions
In this chapter
This chapter contains the following sections:
Section
4.1 Site requirements
4.2 Unpacking
4.3 Install the optical unit
4.4 Install the conductivity flow cell
4.5 Install the pH electrode
4.6 Communication and power supply
4.7 Optical filters (optional)
Monitor UPC-900 Operating Instructions 29-0567-16 AB
WARNING
Before attempting to perform any of the procedures described in
this chapter, you must read and understand all contents of the
Safety instructions chapter.
4 Installation
See page
32
33
33
38
39
42
45
31