GE Monitor UPC-900 Operating Instructions Manual page 17

The system label information is explained in the table below.
Label text
Code no:
Serial no:
Mfg Year:
Voltage:
Frequency:
Max power:
Fuse:
Monitor UPC-900 Operating Instructions 29-0567-16 AB
Description
GE Code number.
GE Serial number.
Manufacturing year.
Voltage.
Supply voltage frequency.
Max power.
Fuse.
Warning! Read the user documentation before using
the system. Do not open any covers or replace parts
unless specifically stated in the user documentation.
This symbol indicates that waste electrical and electron-
ic equipment must not be disposed as unsorted munic-
ipal waste and must be collected separately. Please
contact an authorized representative of the manufac-
turer for information concerning the decommissioning
of equipment.
This symbol indicates that the product contains haz-
ardous materials in excess of the limits established by
the Chinese standard SJ/T11363-2006 Requirements
for Concentration Limits for Certain Hazardous Sub-
stances in Electronics.
The system complies with applicable European direc-
tives.
The system complies with the requirements for
electromagnetic compliance (EMC) in Australia and New
Zealand.
This symbol indicates that UPC-900 has been certified
by a Nationally Recognized Testing Laboratory (NRTL).
NRTL means an organization, which is recognized by
the US Occupational Safety and Health Administration
(OSHA) as meeting the legal requirements of Title 29 of
the Code of Federal Regulations (29 CFR), Part 1910.7.
2 Safety instructions
2.2 Labels
17