Enabling Ssl On A Domain Controller - Dell Remote Access Controller 4 Firmware Version 1.30 User Manual

To add a privilege:
1 Select the Privileges Object tab and click Add.
2 Type the Privilege Object name and click OK.
Click the Products tab to add one or more RAC devices to the association. The associated
devices specify the RAC devices connected to the network that are available for the defined
users or user groups.
NOTE:
You can add multiple RAC devices to an association object.
To add RAC devices or RAC device groups:
1 Select the Products tab and click Add.
2 Type the RAC device or RAC device group name and click OK.
3 In the Properties window, click Apply and then OK.

Enabling SSL on a Domain Controller

If you plan to use Microsoft Enterprise Root CA to automatically assign all your domain
controllers SSL certificate, you must perform the following steps to enable SSL on each
domain controller.
1 Install a Microsoft Enterprise Root CA on a Domain Controller.
Select Start
a
Select Add/Remove Windows Components.
b
In the Windows Components Wizard, select the Certificate Services check box.
c
Select Enterprise root CA as CA Type and click Next.
d
Enter Common name for this CA, click Next, and click Finish.
e
2 Enable SSL on each of your domain controllers by installing the SSL certificate for
each controller.
Click Start
a
Expand the Public Key Policies folder, right-click Automatic Certificate Request Settings
b
and click Automatic Certificate Request.
In the Automatic Certificate Request Setup Wizard, click Next and select
c
Domain Controller.
Click Next and click Finish.
d
Control Panel Add or Remove Programs.
Administrative Tools Domain Security Policy.
Using the DRAC 4 With Microsoft
®
97
Active Directory