Racadm Synopsis; Racadm Options; Table 8-3. Racadm Command Options - Dell Remote Access Controller 4 Firmware Version 1.30 User Manual

Using the racadm CLI Remotely
NOTICE:
information about initially configuring your DRAC 4, including a list of other documents you may need, see
"Installing and Setting Up the DRAC 4."
The racadm CLI provides a remote capability option (
system and execute racadm subcommands from a remote console or management station.
To use the remote capability, you need a valid user name (
and the IP address of the managed system.
NOTE:
Windows 2000 Server, Windows 2000 Professional, Windows Server™ 2003, and Red Hat Enterprise
Linux operating systems.

racadm Synopsis

racadm < options > < subcommand > < subcommand_options >
racadm < options > [-u < user name >] -p < password > -r < racIpAddr >
< subcommand >
racadm < options > -i -r < racIpAddr > < subcommand > or
racadm < options > -i -r < racIpAddr > :<new port number> < subcommand >
if the DRAC 4 HTTPS port number has been changed.
racadm < options > -r < racIpAddr > < subcommand >

racadm Options

Table 8-3 lists the options for the racadm command.

Table 8-3. racadm Command Options

Option
-r <racIpAddr> or
-r <racIpAddr>:<port
number> if the DRAC 4 port
number has been changed
-i
-u <usrName>
-p <password>
130
Using the serial and racadm Commands
Configure the IP address on your DRAC 4 before using the racadm remote capability. For more
The racadm remote capability is supported only on management stations running Microsoft
Description
Specifies the remote IP address of the controller.
Tells racadm to interactively query the user for the user's user name and
password.
Specifies the user name that is used to authenticate the command
transaction. If not specified, the default user name, racadmusr, is used.
If the -u option is used, the -p option must be used, and the -i option
(interactive) is not allowed.
Specifies the password used to authenticate the command transaction.
If the -p option is used, the -i option is not allowed.
r) that allows you to connect to the managed
-
u option) and password (
-
p option),
-