Adding And Configuring Drac 4 Users And Alerts; Adding And Configuring Drac 4 Users; User Properties; Table - Dell Remote Access Controller 4 Firmware Version 1.30 User Manual

Logging Out
Click Log Out in the upper-right corner of the main window.
NOTE:
The Log Out button does not appear until you log in.

Adding and Configuring DRAC 4 Users and Alerts

To manage your system with the DRAC 4, you may want to create unique users with specific
administrative permissions (role-based authority). You can also configure alerts to be emailed to
different users.
This section provides instructions about how to perform the following tasks:
• Adding and Configuring SNMP Alerts
• Configuring the DRAC 4 NIC
• Adding and Configuring SNMP Alerts

Adding and Configuring DRAC 4 Users

1 Click the Configuration tab and select Users.
2 In the User Name column, click [Available].
3 Use the Add/Configure DRAC 4 User page to configure the user name, password, access
permissions, and email alert settings for a new or existing DRAC 4 user.
Configuring a New User Name and Password
Use Table 4-1 to configure a new or existing DRAC 4 user name and password.
Table 4-1. User Properties
Property
User Name
Password
Confirm New Password
Configuring User Permissions
Under User Permissions, click the User Group drop-down menu and select the permissions
group for the user.
Use Table 4-2 to determine the User Group (permissions) for the user.
58
Managing and Recovering a Remote System
Description
Allows you to specify a DRAC 4 user name. (Once the user name is specified,
you cannot change it. Every user must be created with a different user name.)
NOTE:
User names on the local DRAC 4 must not contain the / (forward slash) or
. (period) characters.
Allows you to specify or edit the DRAC 4 user's password.
Requires you to retype the DRAC 4 user's password to confirm.