Installing The Dell Extension To The Active Directory Users And Computers Snap-In; Table - Dell Remote Access Controller 4 Firmware Version 1.30 User Manual

Table 5-7. List of Attributes Added to the Active Directory Schema (continued)
Attribute Name/Description
dellIsDebugCommandAdmin
TRUE if the user has Debug
Command Admin rights on the device.
dellSchemaVersion
The Current Schema Version is used to
update the schema.
dellRacType
This attribute is the Current Rac Type
for the dellRacDevice object and the
backward link to the
dellAssociationObjectMembers
forward link.
dellAssociationMembers
List of dellAssociationObjectMembers
that belong to this Product. This
attribute is the backward link to the
dellProductMembers Linked attribute.
Link ID: 12071
Installing the Dell Extension to the Active Directory Users
and Computers Snap-In
When you extend the schema in Active Directory, you must also extend the Active Directory
Users and Computers snap-in so that the administrator can manage RAC (DRAC 4) devices,
Users and User Groups, RAC Associations, and RAC Privileges. The Dell Extension to the
Active Directory User's and Computers Snap-In is an option that can be installed when you
install your systems management software using the Dell Systems Management Consoles CD.
See the Dell OpenManage Software Quick Installation Guide for further instructions on
installing systems management software.
NOTE:
You must install the Administrator Pack on each system that is managing the Active Directory
DRAC 4 Objects. The installation is described in the following section, "Opening the Active Directory
Users and Computers Snap-In." If you do not install the Administrator Pack, then you cannot view the
Dell RAC Object in the container.
NOTE:
For more information about the Active Directory Users and Computers snap-in, see your
Microsoft documentation.
94
Using the DRAC 4 With Microsoft
Assigned OID/Syntax Object Identifier
1.2.840.113556.1.8000.1280.1.1.2.11
Boolean (LDAPTYPE_BOOLEAN
1.3.6.1.4.1.1466.115.121.1.7)
1.2.840.113556.1.8000.1280.1.1.2.12
Case Ignore String
(LDAPTYPE_CASEIGNORESTRING
1.2.840.113556.1.4.905)
1.2.840.113556.1.8000.1280.1.1.2.13
Case Ignore String
(LDAPTYPE_CASEIGNORESTRING
1.2.840.113556.1.4.905)
1.2.840.113556.1.8000.1280.1.1.2.14
Distinguished Name (LDAPTYPE_DN
1.3.6.1.4.1.1466.115.121.1.12)
®
Active Directory
Single Valued
TRUE
TRUE
TRUE
FALSE